Mon - Fri : 09:30 am - 06:30 pm
Jinglilun Acoustic — Factory & Export Office, China (GMT+8)
A construction foreman reads a fresh acceptance report where reverberation fell from 1.6 to 0.6 seconds at 500 Hz. Inside: what sound dampening tiles can and ca...
Continue Reading....Fresh out of a rework meeting, the site manager behind several detention-area fit-outs compares soundproof door materials with field numbers: STC ratings, panel...
Continue Reading....A 27 mm gap where the drawing said 8 mm sent 210 m² of fence slats wood back for full rework. This is the field record behind that review meeting: 22.6 percent ...
Continue Reading....NRC 0.45 or 0.90, GB 8624 B1 or nothing: the panel you choose for sound panels for walls decides whether the job passes inspection or comes off the wall in six ...
Continue Reading....38 doors rejected, one 90-minute postmortem, zero patience left. A factory QC compares hollow, solid composite, timber and steel acoustic doors on real STC numb...
Continue Reading....A project manager reads the CMA acceptance report for a 420-square-meter training hall: reverberation fell from 2.1 to 0.58 seconds using 12 mm polyester acoust...
Continue Reading....A 63 Hz mode that refused to die, four corner chunks that finally killed it, and the misconceptions that almost sank the budget. This field note from a manufact...
Continue Reading....A panel divider room lives or dies on paperwork most quotes never mention: a B1 burn report under GB 8624-2012, acoustic sheets that separate NRC from STC, and ...
Continue Reading....A factory sales engineer explains what GB 55016-2021, GB 8624-2012 and GB 18580-2017 actually demand from every sound insulation board wall: field Rw targets, B...
Continue Reading....A site manager who signs off sound-rated rooms for a living walks you through the paperwork behind folding room partitions: the ASTM E90 lab report, the ASTM E8...
Continue Reading....
